🗺️ Interactive VLSI Career & Role-Based Learning Roadmap
Explore chip design roles: RTL Design, Design Verification (DV), DFT, Physical Design (PD), and Analog Layout.
What Is Digital?
BeginnerWhy computers use only two levels, what a bit is, and how switches turn into logic. Start here if this is all new.
~20 min
Number Systems
BeginnerBinary, octal and hexadecimal: reading them, converting between them, and how many bits a number needs.
~30 min
Binary Arithmetic and Signed Numbers
BeginnerAdding, subtracting and multiplying in binary, two's complement, and how to spot overflow.
~35 min
Codes: BCD, Gray, ASCII, Parity and Hamming
CoreThe same bits can mean different things. Codes that suit displays, sensors, text and error checking.
~35 min
Logic Gates
BeginnerAND, OR, NOT, NAND, NOR, XOR: the building blocks of digital logic, what's inside them, and why they take time.
~35 min
Boolean Algebra
BeginnerThe algebra of 0s and 1s: laws, De Morgan's theorem, and turning any truth table into an expression you can simplify.
~35 min
Karnaugh Maps
CoreSimplify logic by eye: draw the truth table so neighbours differ by one variable, then circle the groups.
~40 min
The Quine-McCluskey Method
GATEK-maps stop working at about five variables. This is the same idea as a step-by-step procedure a computer can follow.
~30 min
Logic Families
CoreTTL, CMOS and ECL: what real gates do to voltages, how many others they can drive, how fast they go and how much power they burn.
~35 min
Adders, Subtractors and Comparators
CoreBuild arithmetic out of gates: half and full adders, a 4-bit adder whose carry you can watch ripple, subtraction, and magnitude comparison.
~35 min
Multiplexers, Decoders and Encoders
CoreThe blocks that route and translate data: MUX and DEMUX, decoders, encoders, priority encoders and code converters.
~40 min
Fast Arithmetic: Lookahead, BCD and Multipliers
GATEBeat the ripple with carry lookahead, add in decimal, multiply in hardware, and see how Booth's algorithm handles signed numbers.
~45 min
Latches and Flip-Flops
CoreHow a circuit remembers: a bit stored in a loop, the difference between level and edge, and the four flip-flop types.
~40 min
Registers and Shift Registers
CoreStoring a whole word, moving bits along a chain, serial and parallel conversion, and generating pseudo-random bits.
~30 min
Counters
CoreRipple and synchronous counters, designing any count sequence with K-maps, and ring and Johnson counters.
~40 min
Finite State Machines
GATEMoore and Mealy machines, the design recipe from words to gates, sequence detectors and state reduction.
~45 min
Timing and Hazards
GATESetup and hold, how fast a circuit can run, glitches and how to remove them, and what happens when signals cross clock domains.
~45 min
Memories and Programmable Logic
CoreHow RAM and ROM store and find data, why DRAM forgets, sizing memories, and PLAs, PALs and FPGAs.
~45 min
ADC and DAC: Meeting the Analog World
CoreHow digital systems measure and produce real voltages: sampling, aliasing, quantization, and the main converter designs.
~35 min
From Gates to Verilog
CoreStop drawing and start describing: how every circuit in this course is written in Verilog, simulated, and turned into real hardware.
~40 min
From RTL to GDS
GATEHow your Verilog becomes a manufacturable chip: synthesis, floorplan, placement, clock tree, routing, signoff and the GDS file sent to the foundry.
~45 min