Binary counter
Six LEDs can show any number from 0 to 63 in binary. Keep a 6-bit register, add one to it four times a second and drive the LEDs from it.
When a 6-bit register holding 63 adds one, it wraps around to 0 by itself: the carry falls off the top.
lab.v
drag to turn · scroll to zoom
Loading the board…
Press Run on the board: your Verilog is turned into gates in this browser and runs here, cycle by cycle.
Goals
- ○The LEDs count up by one each step
- ○Four steps a second
- ○It wraps from 63 back to 0
Hints
- Reuse the timer from Blink with
CLK_HZ / 4. value <= value + 1;when the timer ends.
Pin log
Run the design to see its outputs change.
Put it on a real board
- The clock is set to the board's 27 MHz, and its active-low buttons and LEDs are flipped for you.