BitFlow

D Latch

intermediate · sequential · 100 XP

Sign in to write your solution, run it in the simulator and submit it for grading.

Sign in or create a free account →

Problem

D Latch The D (Data) latch fixes the SR latch's forbidden state problem by using a single data input. It is **transparent** when enabled — the output tracks the input directly. - `en=1`: Q follows D continuously (transparent) - `en=0`: Q holds its last value (opaque/latched) **Interface** | Port | Direction | Description | |------|-----------|---------------------| | `d` | input | Data input | | `en` | input | Level-sensitive enable (active-high) | | `q` | output | Data output | | `qn` | output | Complement output | **Key difference from D Flip-Flop:** The latch responds to the **level** of `en`, not its edge. When `en` goes low, whatever value was on D at that moment is captured. **Use in RTL:** Latches appear in clock-gating cells and asynchronous interfaces. Unintentional latches (from incomplete if-else) are bugs.

Constraints

  • Use always @(*) — level-sensitive, no clock.
  • When en=0: q must hold (latch behaviour).
  • Declare q and qn as reg.

Examples

Input: en=1, d=1

Output: q=1, qn=0

Transparent — follows D

Input: en=1, d=0

Output: q=0, qn=1

Input: en=0, d=X

Output: q=prev

Latched — holds

Common questions

What does the D Latch problem ask you to build?
D Latch The D (Data) latch fixes the SR latch's forbidden state problem by using a single data input. It is **transparent** when enabled — the output tracks the input directly.
What constraints does D Latch have?
Use always @(*) — level-sensitive, no clock.; When en=0: q must hold (latch behaviour).; Declare q and qn as reg.
What is an example input and output for D Latch?
Input en=1, d=1 gives output q=1, qn=0. Transparent — follows D
Which Verilog concepts does D Latch practise?
sequential, latch, level-sensitive, enable.