BitFlow

D Flip-Flop with Enable

intermediate · sequential · 120 XP

Sign in to write your solution, run it in the simulator and submit it for grading.

Sign in or create a free account →

Problem

D Flip-Flop with Enable A D flip-flop that only captures `d` when the enable signal `en` is high. When `en=0`, `q` holds its current value regardless of what `d` does. This is the **most common flip-flop variant in real RTL**. Every pipeline register, every configuration register, every write-gated storage element is this circuit. Synthesisers map it to a flip-flop with a dedicated clock-enable pin (CE on Xilinx, ENA on Intel/Altera) — saving power by stopping unnecessary switching. **Interface** | Port | Direction | Description | |-------|-----------|----------------------------------| | `clk` | input | Clock (rising-edge triggered) | | `rst` | input | Async reset (active-high) | | `en` | input | Clock enable | | `d` | input | Data input | | `q` | output | Registered output | Implement for 1-bit. Verify that toggling `d` rapidly while `en=0` produces zero output transitions.

Constraints

  • Reset is asynchronous: `always @(posedge clk or posedge rst)`.
  • When rst=1: q <= 0 (async, immediate).
  • When rst=0 and en=1: q <= d on posedge clk.
  • When rst=0 and en=0: q holds its current value.

Examples

Input: en=0, d toggles every cycle

Output: q stays constant

Enable gates the capture

Input: en=1, d=1

Output: q=1 on next posedge clk

Normal capture when enabled

Input: rst=1 (async)

Output: q=0 immediately

Async reset overrides enable

Common questions

What does the D Flip-Flop with Enable problem ask you to build?
D Flip-Flop with Enable A D flip-flop that only captures `d` when the enable signal `en` is high. When `en=0`, `q` holds its current value regardless of what `d` does. This is the **most common flip-flop variant in real RTL**.
What constraints does D Flip-Flop with Enable have?
Reset is asynchronous: `always @(posedge clk or posedge rst)`.; When rst=1: q <= 0 (async, immediate).; When rst=0 and en=1: q <= d on posedge clk.; When rst=0 and en=0: q holds its current value.
What is an example input and output for D Flip-Flop with Enable?
Input en=0, d toggles every cycle gives output q stays constant. Enable gates the capture
Which Verilog concepts does D Flip-Flop with Enable practise?
sequential, flip-flop, DFF, enable, interview.