D Flip-Flop with Synchronous Reset
intermediate · sequential · 120 XP
Sign in to write your solution, run it in the simulator and submit it for grading.
Sign in or create a free account →Problem
D Flip-Flop with Synchronous Reset
A **synchronous reset** flip-flop only resets on the rising clock edge — not immediately when `rst` goes high. The sensitivity list is `always @(posedge clk)` only; `rst` is checked as a regular condition inside the block.
**Interface**
| Port | Direction | Description |
|------|-----------|------------------------------------|
| `clk` | input | Clock (rising-edge triggered) |
| `rst` | input | Reset (synchronous, active-high) |
| `d` | input | Data input |
| `q` | output | Registered output |
**Key insight:** assert `rst=1` mid-cycle — the output does **not** change until the next rising edge. Compare against the async-reset DFF: the outputs will diverge at the exact moment `rst` is asserted between edges.
In your comments, explain which reset style a synchronous design methodology prefers and why.
Constraints
- Sensitivity list must be `always @(posedge clk)` only — no `rst` in the sensitivity list.
- On posedge clk: if rst=1, q <= 0; else q <= d.
- No async behaviour — rst mid-cycle must not affect q.
Examples
Input: rst=1 asserted mid-cycle
Output: q unchanged until next posedge clk
Synchronous reset waits for clock edge
Input: posedge clk with rst=1
Output: q=0
Reset takes effect on the clock edge
Input: posedge clk with rst=0, d=1
Output: q=1
Normal D capture
Common questions
- What does the D Flip-Flop with Synchronous Reset problem ask you to build?
- D Flip-Flop with Synchronous Reset A **synchronous reset** flip-flop only resets on the rising clock edge — not immediately when `rst` goes high. The sensitivity list is `always @(posedge clk)` only; `rst` is checked as a regular condition inside the block.
- What constraints does D Flip-Flop with Synchronous Reset have?
- Sensitivity list must be `always @(posedge clk)` only — no `rst` in the sensitivity list.; On posedge clk: if rst=1, q <= 0; else q <= d.; No async behaviour — rst mid-cycle must not affect q.
- What is an example input and output for D Flip-Flop with Synchronous Reset?
- Input rst=1 asserted mid-cycle gives output q unchanged until next posedge clk. Synchronous reset waits for clock edge
- Which Verilog concepts does D Flip-Flop with Synchronous Reset practise?
- sequential, flip-flop, DFF, synchronous-reset, interview.