Down Counter — Synchronous
intermediate · sequential · 130 XP
Sign in to write your solution, run it in the simulator and submit it for grading.
Sign in or create a free account →Problem
Down Counter — Synchronous
Implement a 4-bit **synchronous down-counter**. Instead of incrementing, it decrements by 1 each enabled clock cycle and wraps from 0 → 15 (natural 4-bit underflow).
**Interface**
| Port | Direction | Width | Description |
|-----------|-----------|-------|------------------------------------|
| `clk` | input | 1 | Clock — rising edge |
| `rst` | input | 1 | Synchronous reset — loads max value (15) |
| `en` | input | 1 | Enable — decrement only when high |
| `count[3:0]`| output | 4 | Current count (15 → 0 → 15 → ...) |
**Behaviour on posedge clk:**
- rst=1 → count = 4'hF (reset to max)
- rst=0, en=1 → count = count - 1
- rst=0, en=0 → count holds
Note: 0 - 1 naturally wraps to 15 in 4-bit arithmetic — no special case needed.
Constraints
- Use always @(posedge clk) — synchronous.
- rst loads 4'hF (max value), not 0.
- Use non-blocking assignments (<=).
Examples
Input: rst=1, clk↑
Output: count=15
Input: en=1, count=5, clk↑
Output: count=4
Input: en=1, count=0, clk↑
Output: count=15 (wrap)
Common questions
- What does the Down Counter — Synchronous problem ask you to build?
- Down Counter — Synchronous Implement a 4-bit **synchronous down-counter**. Instead of incrementing, it decrements by 1 each enabled clock cycle and wraps from 0 → 15 (natural 4-bit underflow).
- What constraints does Down Counter — Synchronous have?
- Use always @(posedge clk) — synchronous.; rst loads 4'hF (max value), not 0.; Use non-blocking assignments (<=).
- What is an example input and output for Down Counter — Synchronous?
- Input rst=1, clk↑ gives output count=15.
- Which Verilog concepts does Down Counter — Synchronous practise?
- sequential, counter, down, synchronous, reset.