BitFlow

Shift Register (SISO)

intermediate · sequential · 125 XP

Sign in to write your solution, run it in the simulator and submit it for grading.

Sign in or create a free account →

Problem

Shift Register — SISO (Serial-In Serial-Out) A 4-bit SISO shift register. Data enters one bit at a time from `si` and exits one bit at a time from `so`. On every `posedge clk`: - The register shifts left: `reg[3:1] <= reg[2:0]` - New data enters at LSB: `reg[0] <= si` - Serial output: `so = reg[3]` (MSB leaves first) **Interface** | Port | Direction | Description | |-------|-----------|---------------------------| | `clk`| input | Clock | | `rst`| input | Synchronous reset | | `si` | input | Serial input | | `so` | output | Serial output (MSB first) | **Use case:** UART transmit, SPI interfaces, pipeline delay lines. After loading 4 bits, the first bit appears at `so` after 4 clock cycles.

Constraints

  • 4-bit internal register.
  • Shift direction: si enters at bit 0, so exits from bit 3.
  • Use non-blocking assignments (<=).

Examples

Input: Send 1,0,1,1 serially (LSB first)

Output: so outputs 1,0,1,1 four cycles later

Common questions

What does the Shift Register (SISO) problem ask you to build?
Shift Register — SISO (Serial-In Serial-Out) A 4-bit SISO shift register. Data enters one bit at a time from `si` and exits one bit at a time from `so`.
What constraints does Shift Register (SISO) have?
4-bit internal register.; Shift direction: si enters at bit 0, so exits from bit 3.; Use non-blocking assignments (<=).
What is an example input and output for Shift Register (SISO)?
Input Send 1,0,1,1 serially (LSB first) gives output so outputs 1,0,1,1 four cycles later.
Which Verilog concepts does Shift Register (SISO) practise?
sequential, shift-register, SISO, serial.