BitFlow

SPI Master Controller (Mode 0, Parameterized)

advanced · interface · 300 XP

Sign in to write your solution, run it in the simulator and submit it for grading.

Sign in or create a free account →

Problem

SPI Master Controller — Mode 0 (CPOL=0, CPHA=0) Implement a complete SPI master that initiates transfers, generates the serial clock (SCK), shifts data, and handles CS assertion/deassertion. **SPI Mode 0 timing:** - `CPOL=0`: SCK idles low - `CPHA=0`: data is captured on rising SCK edge, shifted on falling SCK edge - `MOSI` changes on falling SCK (so slave can capture on the rising edge) - Slave `MISO` data is sampled on rising SCK **Parameters** - `DATA_WIDTH`: bits per transfer (default 8) - `CLK_DIV`: divider for SCK frequency = `clk / (2 * CLK_DIV)` (default 4) **Interface** | Port | Direction | Width | Description | |-------------|-----------|------------|--------------------------------| | `clk` | input | 1 | System clock | | `rst` | input | 1 | Sync reset | | `start` | input | 1 | Start transfer pulse | | `din` | input | DATA_WIDTH | Data to transmit (MOSI) | | `cs_n` | output | 1 | Chip select (active low) | | `sclk` | output | 1 | Serial clock | | `mosi` | output | 1 | Master out, slave in | | `miso` | input | 1 | Master in, slave out | | `dout` | output | DATA_WIDTH | Data received (MISO) | | `done` | output | 1 | Transfer complete pulse | **FSM States:** 1. **IDLE:** Wait for `start` 2. **WAIT_EDGE:** Count clock divider to generate SCK edges (rising/falling) 3. **SHIFT_OUT:** On falling SCK, assert MOSI with next bit 4. **CAPTURE_IN:** On rising SCK, capture MISO bit 5. **DONE:** Assert `done` pulse, return to IDLE **Behaviour:** - Assert `cs_n=0` at start - Shift `din` MSB-first on falling SCK edges - Capture `miso` on rising SCK edges into `dout` - After `DATA_WIDTH` bits, deassert `cs_n=1` and pulse `done` - Ready for next transfer immediately **Key insight:** SCK frequency is half the divide rate. A CLK_DIV of 4 means 4 system clocks per SCK half-period, so SCK runs at clk/(2*4)=clk/8.

Constraints

  • Use parameterized DATA_WIDTH and CLK_DIV.
  • Generate SCK by counting system clock cycles; toggle SCK every CLK_DIV cycles.
  • Shift data MSB-first (bit [DATA_WIDTH-1] first).
  • Mode 0: CPOL=0 (SCK idles low), CPHA=0 (sample on rising, shift on falling).
  • done is a 1-cycle pulse; cs_n stays low throughout the transfer and deasserts after done.

Examples

Input: start=1, din=8'hAA, CLK_DIV=4

Output: 8 SCK cycles; cs_n=0 for duration; mosi shifts AA; dout=loopback

Standard transfer

Input: CLK_DIV=2 (faster SCK)

Output: Same transfer, 2x faster SCK frequency

Parameterized frequency

Common questions

What does the SPI Master Controller (Mode 0, Parameterized) problem ask you to build?
SPI Master Controller — Mode 0 (CPOL=0, CPHA=0) Implement a complete SPI master that initiates transfers, generates the serial clock (SCK), shifts data, and handles CS assertion/deassertion.
What constraints does SPI Master Controller (Mode 0, Parameterized) have?
Use parameterized DATA_WIDTH and CLK_DIV.; Generate SCK by counting system clock cycles; toggle SCK every CLK_DIV cycles.; Shift data MSB-first (bit [DATA_WIDTH-1] first).; Mode 0: CPOL=0 (SCK idles low), CPHA=0 (sample on rising, shift on falling).; done is a 1-cycle pulse; cs_n stays low throughout the transfer and deasserts after done.
What is an example input and output for SPI Master Controller (Mode 0, Parameterized)?
Input start=1, din=8'hAA, CLK_DIV=4 gives output 8 SCK cycles; cs_n=0 for duration; mosi shifts AA; dout=loopback. Standard transfer
Which Verilog concepts does SPI Master Controller (Mode 0, Parameterized) practise?
interface, SPI, protocol, interview, master.