Up-Down Counter
intermediate · sequential · 145 XP
Sign in to write your solution, run it in the simulator and submit it for grading.
Sign in or create a free account →Problem
Up-Down Counter
A **synchronous up-down counter** that counts up or down depending on a direction control input.
**Interface**
| Port | Direction | Width | Description |
|-----------|-----------|-------|------------------------------------|
| `clk` | input | 1 | Clock — rising edge |
| `rst` | input | 1 | Synchronous reset → count=0 |
| `en` | input | 1 | Enable |
| `up` | input | 1 | 1=count up, 0=count down |
| `count[3:0]`| output | 4 | Current count value |
**Behaviour on posedge clk:**
- rst=1 → count = 0
- en=1, up=1 → count = count + 1
- en=1, up=0 → count = count - 1
- en=0 → count holds
Both overflow (15→0) and underflow (0→15) wrap naturally in 4-bit arithmetic.
Constraints
- Synchronous design — always @(posedge clk).
- rst > en priority.
- up=1 increments, up=0 decrements.
- Use non-blocking assignments (<=).
Examples
Input: up=1, en=1, count=14, clk↑
Output: count=15
Input: up=0, en=1, count=0, clk↑
Output: count=15 (underflow)
Common questions
- What does the Up-Down Counter problem ask you to build?
- Up-Down Counter A **synchronous up-down counter** that counts up or down depending on a direction control input.
- What constraints does Up-Down Counter have?
- Synchronous design — always @(posedge clk).; rst > en priority.; up=1 increments, up=0 decrements.; Use non-blocking assignments (<=).
- What is an example input and output for Up-Down Counter?
- Input up=1, en=1, count=14, clk↑ gives output count=15.
- Which Verilog concepts does Up-Down Counter practise?
- sequential, counter, up-down, bidirectional, synchronous.