Running light
Keep the position of the lit LED, 0 to 5, in a register, move it on ten times a second, and decode it: led = 6'b000001 << pos.
Registers start at 0 here and on a real FPGA, so starting with a position rather than a pattern means the light is there from the first moment.
lab.v
drag to turn · scroll to zoom
Loading the board…
Press Run on the board: your Verilog is turned into gates in this browser and runs here, cycle by cycle.
Goals
- ○Exactly one LED is on
- ○The light moves on every 0.1 s
- ○It wraps from LED 5 back to LED 0
Hints
pos <= (pos == 5) ? 0 : pos + 1;- A 3-bit
posholds 0–5.
Pin log
Run the design to see its outputs change.
Put it on a real board
- The clock is set to the board's 27 MHz, and its active-low buttons and LEDs are flipped for you.